Datasheet

Software
Software Tool
In the follow ing guide, below tools w ill be needed, please install it to your computer.
Arduino, portable serial tool, used to open the serial port of Seeeduino LoRaWAN w ith GPS (RHF76-052AM) and send AT commands to it.
PuTTY, terminal tool include both serial and SSH terminal, used to control Raspberry Pi.
Internet brow ser, used to access RHF2S001 integrated LoRaWAN server (It is recommended to use Chrome or Firefox).
Note
Y ou may hav e y our other fav orite serial tools,of cause you can use them.However if you are not sure about y our tools.Pleae
use the ones we recommend.
Connect To Local Server
Step 1. Power up and connect to putty
a) First, make sure the serial tool and RPi (RHF4T002 Adapter) are connected correctly.
b) Plug FT232 tool to PC (If COM port is not recognized correctly, please refer below driver
installation chapter)
c) Open De vice Manager of your PC to get the right COM port. Like COM15 for example. Configure
ExtraPuTTY according to below picture (Speed 115200, others use defaults), click Open. As the gatew ay is still not opened, so there is nothing in the terminal.