Datasheet

To confirm the default channel of your Seeeduino_LoRAWAN GPS, you w ill get 3 channels. If there is no available channel, you can change the channels of
Seeeduino_LoRAWAN by the command below .
at+ch=0,868.1
at+ch=1,868.3
at+ch=2,868.5
Then you can use at+ch again to check.
c) Add Seeeduino_LoRAWAN GPS as an ABP Node
Log in Loriot server , Click Dash Board->Applications->SimpleApp . Click Im port ABP ，input below items：
DevAddr: Seeeduino_LoRAWAN GPS get through "AT+ID" command (Note: Loriot doesn't support colon connector,
need remove manually)
FCntUp：Set to 1
FCntDn：Set to 1
NWKSKEY：Default value 2B7E151628AED2A6ABF7158809CF4F3C
APPSKEY：Default value 2B7E151628AED2A6ABF7158809CF4F3C
EUI：DEVEUI, Seeeduino_LoRAWAN GPS get through "AT+ID" command
Click Im port Device button to finish the device import.
Now choose Dashboard -> Applications -> Sam ple App , you w ill see the new ABP Node you've just added.