Datasheet

ManualsBrandsSeeed Studio ManualsDevelopment Boards & KitsLoRa LoRaWAN Gateway 868MHz

Now please open the serial monitor in the upper right corner ( or you can press Ctrl+Shift+M at the same time ).Choose New line (This option w ill add "\r\n" at

the end of each command.), set the baud rate 9600.Then tap the commands below and press se nd.

For EU868

AT+FDEFAULT=RISINGHF

AT+DR=EU868

For US915

AT+FDEFAULT=RISINGHF

AT+DR=US915HYBRID

AT+RXWIN2=923.3,DR8