Datasheet

GrovePi+ Start kit for Raspberry Pi
Carrying a GrovePi+ board together with 12 carefully selective Grove sensors with 10
pieces cables, this starter kit gets you up and running with the Raspberry Pi quickly.
Just slip the GrovePi+ board over your Raspberry Pi and connect sensors to the board,
you're ready to start hardware playing and prototyping with the powerful platform.
The GrovePi+ is stacked on top of the Raspberry Pi without the need for any other
connections. Communication between the two occurs over the I2C interface. All
Grove modules connect to the universal Grove connectors on the GrovePi+ shield via
the universal 4 pin connector cable.
Grove modules, which work on analogue and digital signals, connect directly to the
ATMEGA328 microcontroller on the Grove Pi+. The microcontroller acts as an
interpreter between the Raspberry Pi and the Grove sensors. It sends, receives, and
executes commands sent by the Raspberry Pi.