Datasheet

NEO-6 - Data Sheet
GPS.G6-HW-09005-E Page 14 of 25
3 Electrical specifications
3.1 Absolute maximum ratings
Parameter
Symbol
Module
Min
Max
Units
Condition
Power supply voltage
VCC
NEO-6G
-0.5
2.0
V
NEO-6Q, 6M, 6P, 6V, 6T
-0.5
3.6
V
Backup battery voltage
V_BCKP
All
-0.5
3.6
V
USB supply voltage
VDDUSB
All
-0.5
3.6
V
Input pin voltage
Vin
All
-0.5
3.6
V
Vin_usb
All
-0.5
VDDU
SB
V
DC current trough any digital I/O
pin (except supplies)
Ipin
10
mA
VCC_RF output current
ICC_RF
All
100
mA
Input power at RF_IN
Prfin
NEO-6Q, 6M, 6G, 6V, 6T
15
dBm
source impedance
= 50 , continuous
wave
NEO-6P
-5
dBm
Storage temperature
Tstg
All
-40
85
°C
Table 9: Absolute maximum ratings
GPS receivers are Electrostatic Sensitive Devices (ESD) and require special precautions when
handling. For more information see chapter 6.4.
Stressing the device beyond the “Absolute Maximum Ratings” may cause permanent damage.
These are stress ratings only. The product is not protected against overvoltage or reversed
voltages. If necessary, voltage spikes exceeding the power supply voltage specification, given in
table above, must be limited to values within the specified boundaries by using appropriate
protection diodes. For more information see the LEA-6/NEO-6/ MAX-6 Hardware Integration
Manual [1].