Datasheet

Figure 12 RTSADDR command
Read command is used to read data from device.It has byte,half word and word operation.When devices
receives the command,they shall check if the command's RTSADDR matches their own RTSADDR.The
device's RTSADDR is set by set run-time slave address(RTSADDR) command.
Figure 13 Read command
Write command is used to write data to the devices.It has byte,half word and word operation.When devices
receive the command,they shall check if the command's RTSADDR matches their own RTSADDR.The
device's RTSADDR is set by set run-time slave address(RTSADDR) command.
Figure 14 Write command