Datasheet

Register description LSM6DS3
62/99 DocID026899 Rev 7
9.25 D6D_SRC (1Dh)
Portrait, landscape, face-up and face-down source register (r)
9.26 STATUS_REG (1Eh)
Table 80. D6D_SRC register
0
(1)
1. This bit must be set to ‘0’ for the correct operation of the device.
D6D_IA ZH ZL YH YL XH XL
Table 81. D6D_SRC register description
D6D_
IA
Interrupt active for change position portrait, landscape, face-up, face-down. Default value: 0
(0: change position not detected; 1: change position detected)
ZH
Z-axis high event (over threshold). Default value: 0
(0: event not detected; 1: event (over threshold) detected)
ZL
Z-axis low event (under threshold). Default value: 0
(0: event not detected; 1: event (under threshold) detected)
YH
Y-axis high event (over threshold). Default value: 0
(0: event not detected; 1: event (over-threshold) detected)
YL
Y-axis low event (under threshold). Default value: 0
(0: event not detected; 1: event (under threshold) detected)
X_H
X-axis high event (over threshold). Default value: 0
(0: event not detected; 1: event (over threshold) detected)
X_L
X-axis low event (under threshold). Default value: 0
(0: event not detected; 1: event (under threshold) detected)
Table 82. STATUS_REG register
- - - - EV_BOOT TDA GDA XLDA
Table 83. STATUS_REG register description
EV_BOOT
Boot running flag signal. Default value: 0
(0: no boot running; 1: boot running)
TDA
Temperature new data available. Default: 0
(0: no set of data is available at temperature sensor output;
1: a new set of data is available at temperature sensor output)
GDA
Gyroscope new data available. Default value: 0
(0: no set of data available at gyroscope output;
1: a new set of data is available at gyroscope output)
XLDA
Accelerometer new data available. Default value: 0
(0: no set of data available at accelerometer output;
1: a new set of data is available at accelerometer output)