Grove - Vibration Motor User Manual Release date: 2015/9/22 Version: 1.0 Wiki: http://www.seeedstudio.com/wiki/Grove_-_Relay Bazaar: http://www.seeedstudio.com/depot/Grove-Vibration-Motor-p-839.
Document Revision History Revision Date Author Description 1.
Contents Document Revision History ·········································································2 1. Introduction ·······················································································2 2. Features ····························································································3 3. Specification ······················································································4 4.
Disclaimer For physical injuries and possessions loss caused by those reasons which are not related to product quality, such as operating without following manual guide, natural disasters or force majeure, we take no responsibility for that. Under the supervision of Seeed Technology Inc., this manual has been compiled and published which covered the latest product description and specification. The content of this manual is subject to change without notice.
1. Introduction This is a mini vibration motor suitable as a non-audible indicator. When the input is HIGH, the motor will vibrate just like your cell phone on silent mode.
2.
3. Specification Item Min Typ Max Operate Voltage 2.0V 5.0V 5.5V Control Mode Logic Level (When Logic HIGH, the motor is ON. When LOW, the motor is OFF.
4. Usage 4.1 With Arduino To make it vibrate is just as easy as to turn on an LED. Here is an example showing how to turn on the vibration motor. 1. Plug it onto the Digital port 9 of Grove - Base Shield using a Grove cable. 2. Plug the Grove - Base Shield onto Arduino. 3. Connect Arduino to PC by using a USB cable. 4. Copy and paste code below to a new Arduino sketch, and upload it to your Arduino. Please click here if you do not know how to upload.
Now, feel the vibration of your motor! 4.2 With Raspberry Pi 1. You should have got a raspberry pi and a grovepi or grovepi+. 2. You should have completed configuring the development enviroment, otherwise follow here. 3. Connection Plug the sensor to grovepi socket D8 by using a grove cable. 4. Navigate to the demos' directory: cd yourpath/GrovePi/Software/Python/ To see the code nano grove_vibration_motor.
5. Run the demo. sudo python grove_vibration_motor.
5. Version Tracker Revision Descriptions Release v0.9b Initial public release May 10, 2011 v1.0 directly use a I/O port to drive vibration Motor Nov 5, 2011 v1.
6.