Datasheet

3. Connect the 12V DC or 9V DC power wires to the 2 pin terminal.

1. In cases that you want to utilize the cascade feature, prepare another driver and strip first. Then use a

Grove cable to connect the Grove socket marked "out" on the first board and the Grove socket marked

"IN" on the second board. Done. Two strips will shine in sync now.

3.2 Software Programming

1. Download the LED Strip Driver Library. Unzip and import it into Arduino-1.0 Libraries: ..\arduino-

1.0\libraries.

2. Upload the SingleLEDStrip demo code if you only use a single driver.