Datasheet

10
MotorDirectionSet(0b1100);
delay(4);
MotorDirectionSet(0b1000);
delay(4);
MotorDirectionSet(0b1001);
delay(4);
}
}
This connected 4-wire stepper will rotate; you can adjust the rotation speed or step number in your Arduino
program. You can also use some other stepper libraries to control it. For all the demo code please refer
to Resource.
2. Control the Stepper using the I2C motor Driver V1.3 on-chip Atmega8L.
Take 24BYJ48 as an example, The hardware installation as show below:
Note: