Datasheet

9
void setup()
{
Wire.begin();
SeeedOled.init(); //initialze SEEED OLED display
DDRB|=0x21; //digital pin 8, LED glow indicates OLED properly
Connected .
PORTB |= 0x21;
SeeedOled.setInverseDisplay(); // Set Display to inverse mode
SeeedOled.clearDisplay(); // clear the screen and set
start position to top left corner
SeeedOled.drawBitmap(SeeedLogo,1024); // 1024 = 128 Pixels * 64
Pixels / 8
}
void loop()
{
}
 Upload the code. Please click here if you do not know how to upload.
You can see: