Datasheet

WS2813-Mini

Intelligent control LED

integrated light source

http://www.world-semi.com

 Precautions

Pressing the colloid surface will affect the reliability of LED because the LED is advanced silicone-gel. And therefore

precautions should be taken to avoid the strong pressure on the component. It’s proper to make the LED be used in safe

condition when using a suction nozzle. Silicon packing with soft and elastic, it greatly reduces thermal stresses and

unable to bear external mechanical forces. Therefore, preventive measures should be taken in process of manually

handling.

1 Clip the LED from its side.

2 Neither directly touch the gel surface with the hand or sharp instrument, it may damage its internal circuit.

3 Not to be double stacked, it may damage its internal circuit.

4 Can not be stored in or applied in the acidic sites of PH<7.