Datasheet

晶汉达 · JHD
MODEL: JHD1804
Pressure on the metallic
frame and PCB may deform
the conductive rubber or
Don’t Press the Metallic Frame and Disassemble
the LCM
Slowly Peel Off Protective Film!
be reshaped, which will
conductive rubber may
LCD may be shifted or
cause defects.
the
conductive
rubber
or
break the liquid crystal
cell and back light, which
will cause defects.
Avoid static electricity.
Avoid Static Electricity! Wear Gloves While Handing!
Please be sure to ground
human body and electric
apploances during work.
It is preferable to use
conductive mat on table
and wear cotton clothes
or conduction processed
fiber. Synthetic fiber is
not recommended.
GLOVE
It is preferable to wear gloves
to avoid damaging the LCD.
Please do not touch electrodes
with bare hands or make
them dirty.
Keep Away From Extreme Heat and Humidity!
Alcohol
Use Alcohol to Clean Terminals!
LCD deteriorates.
When attaching with the
heat seal or anisontropically
conductive film, wipe off
with alcohol before use.
Alcohol
HTTP://WWW.JHDLCD.COM.CN
21Page: