Grove - DMX512 User Manual Release date： 2015/9/22 Version： 1.0 Wiki: http://www.seeedstudio.com/wiki/Grove_-_DMX512 Bazaar:http://www.seeedstudio.com/depot/Grove-DMX512-p1447.
Document Revision History Revision Date Author Description 1.0 Sep 22, 2015 Jiankai.
Contents Document Revision History ·········································································2 1. Introduction ·······················································································2 2. Feature ·····························································································3 3. Usage ······························································································4 4.
Disclaimer For physical injuries and possessions loss caused by those reasons which are not related to product quality, such as operating without following manual guide, natural disasters or force majeure, we take no responsibility for that. Under the supervision of Seeed Technology Inc., this manual has been compiled and published which covered the latest product description and specification. The content of this manual is subject to change without notice.
1. Introduction The Grove – DMX512 is a adapter from Grove interface to DMX512 interface(industry standard EIA-485 interface. The module is based on SN75176 chip which can balance transmission lines and meet ANSI Standard EIA-485 interface. Now it is convenience to control stage lighting and DMX512 console for Arduino.
2.
3. Usage Arduino can easily control DMX512 device by using the Grove - DXM512 module. Take the LED crystal magic ball light as an example. The Specific Operation as follows: Connect Grove interface of Grove - DMX512 to D3 port of Grove - Base Shield and plug Grove - Base Shield to Arduino. Connect DMX512 interface of Grove - DMX512 to the DMXIN interface of the LED crystal magic ball light using a DMX cable. And power for the LED crystal magic ball light.
4.
