Datasheet

Baseboard developer guide
This section provides details to help you integrate the Coral SoM into your own baseboard (carrier board) hardware.
Reference design
If you'd like to see a reference baseboard design, download the following schematic and layout files for the Coral Dev
Board.
Baseboard connectors
The SoM connects to the host baseboard with three 100-pin connectors.
The location of each connector plug on the SoM is illustrated in figure 3, and the corresponding position for each
receptacle on your baseboard is illustrated in figure 5.
Version 1.2 (August 2019)
File Description
Coral-Dev-Board-baseboard-schematic.pdf Baseboard schematic in PDF
Coral-Dev-Board-baseboard-schematic-Altium.zip Baseboard schematic files in Altium format
Coral-Dev-Board-baseboard-layout-Allegro.brd Baseboard CAD layout in BRD format
Table 28. SoM and baseboard connectors
SoM Baseboard
3x 100-position plug
Hirose Electric DF40C-100DP-0.4V(51)
3x 100-position receptacle
Hirose Electric DF40HC(3.0)-100DS-0.4V(51)
Copyright 2019 Google LLC. All rights reserved.