JETSON NANO DEVELOPER KIT DA_09402_001_01 | March 18, 2019 User Guide
DOCUMENT CHANGE HISTORY DA_09402_001_01 Version Date Authors Description of Change 1.0 March 18, 2019 plawrence Initial release NOTE Welcome to the NVIDIA Jetson platform! There two key things you should do right away: 1. Sign up for the NVIDIA Developer Program – this enables you to ask questions and contribute on the NVIDIA Jetson Forums, gives access to all documentation and collateral on the Jetson Download Center, and more. 2.
TABLE OF CONTENTS Note .........................................................................................ii Developer Kit Setup and Hardware ...................................................4 Developer Kit Setup ............................................................................ Included in the Box ............................................................................. Developer Kit Interfaces ....................................................................... Interface Details .
DEVELOPER KIT SETUP AND HARDWARE The NVIDIA® Jetson Nano™ Developer Kit is an AI computer for makers, learners, and developers that brings the power of modern artificial intelligence to a low-power, easyto-use platform. Get started quickly with out-of-the-box support for many popular peripherals, add-ons, and ready-to-use projects. Jetson Nano is supported by the comprehensive NVIDIA® JetPack™ SDK, and has the performance and capabilities needed to run modern AI workloads.
INCLUDED IN THE BOX • Jetson Nano module (P3448-0000) • Reference carrier board (P3449) • Small paper card with quick start and support information • Folded paper stand for the developer kit DEVELOPER KIT INTERFACES Developer kit module and carrier board Jetson Nano Developer Kit DA_09402_001_01 | 5
Interface Details This section highlights some of the Jetson Nano Developer Kit interfaces. See the Jetson Nano Developer Kit Carrier Board Specification for comprehensive information. Module • [J501] Slot for a microSD card. • The passive heatsink supports 10W module power usage at 25° C ambient temperature. If your user case requires additional cooling, you can configure the module to control a system fan.
• • Pins 7 and 8 disable auto power-on. • Pins 1 and 2 initiate power-on if auto power-on is disabled. • Pins 5 and 6 reset the system. • Pins 3 and 4 put the developer kit into Force Recovery Mode if they are connected when it is powered on. [J41] 40-pin expansion header includes: • Power pins. Two 3.3V power pins and two 5V power pins. These are not switchable; power is always available when the developer kit is connected to power. Two 5V pins can be used to power the developer kit at 3A each.
GEO151UB-6025 Power Supply (validated by NVIDIA for use with the Jetson Nano Developer Kit) is designed to provide 5.25V. The critical point is that the Jetson Nano module requires a minimum of 4.75V to operate. Use a power supply capable of delivering 5V at the J28 Micro-USB connector. Other Power Supply Options If the developer kit’s total load is expected to exceed 2A, e.g.
JETPACK NVIDIA JetPack SDK is the most comprehensive solution for building AI applications. It includes the latest OS images for Jetson products, along with libraries and APIs, samples, developer tools, and documentation. SUMMARY OF JETPACK COMPONENTS This section briefly describes each component of JetPack. For additional details about these components, see the online documentation for JetPack at: https://docs.nvidia.com/jetson/jetpack/index.
JetPack component Sample locations on reference filesystem TensorRT /usr/src/tensorrt/samples/ cuDNN /usr/src/cudnn_samples_/ CUDA /usr/local/cuda-/samples/ Multimedia API /usr/src/tegra_multimedia_api/ VisionWorks /usr/share/visionworks/sources/samples/ /usr/share/visionworks-tracking/sources/samples/ /usr/share/visionworks-sfm/sources/samples/ OpenCV /usr/share/OpenCV/samples/ Developer Tools JetPack includes the following developer tools.
Documentation Documents that are relevant to developers using JetPack include: • JetPack Documentation • Nsight Eclipse Edition Documentation • NVIDIA Linux Driver Package Development Guide • CUDA-GDB Documentation • CUDA-MEMCHECK Documentation • Tegra L4T Release Notes • Nsight Systems • TensorRT Documentation • nvprof • cuDNN Documentation • Visual Profiler • CUDA Toolkit • Nsight Graphics • Multimedia API Reference • Nsight Compute • VisionWorks Documentation • Nsight Com
WORKING WITH L4T NVIDIA L4T (the operating system component of JetPack) provides the Linux kernel, Bootloader, board support package (BSP), and sample filesystem for Jetson developer kits. These are all available for individual download on the main L4T page of the Jetson Developer Site. Please review the L4T Development Guide—it is a very important resource.
COMPLIANCE INFORMATION The NVIDIA Jetson Nano Developer Kit is compliant with the regulations listed in this section. UNITED STATES Federal Communications Commission (FCC) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including any interference that may cause undesired operation of the device.
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Warning: The FCC requires that you be notified that any changes or modifications to this device not expressly approved by the manufacturer could void the user’s authority to operate the equipment.
EUROPEAN UNION European Conformity; Conformité Européenne (CE) This device complies with the following Directives: Electromagnetic Compatibility Directive 2014/30/EU Low Voltage Directive 2014/35/EU RoHS Directive 2011/65/EU The full text of EU declaration of conformity is available at the following internet address: www.nvidia.com/support A copy of the Declaration of Conformity to the essential requirements may be obtained directly from NVIDIA GmbH (Floessergasse 2, 81369 Munich, Germany).
Japan RoHS Material Content Declaration 日本工業規格JIS C 0950:2008により、2006年7月1日以降に販売される特定分野の電気および 電子機器について、製造者による含有物質の表示が義務付けられます。 機器名称: Jetson Nano Developer Kit 開発者コンポーネント 特定化学物質記号 主な分類 PCBボード パッシブ電子部品 アクティブ電子部品 コネクター / ケーブル Pb Hg Cd Cr(VI) PBB PBDE 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 除外項 目 除外項 目 除外項 目 プロセッサー 0 0 0 0 0 0 メモリ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 機械部品 はんだ付け材料 フラックス、クリームはん だ、ラベル、その他消耗品 除外項 目 注： 1.
2.「除外項目」は、特定化学物質が含有マークの除外項目に該当するため、特定化学物質につ いて、日本工業規格JIS C 0950:2008に基づく含有マークの表示が不要であることを示しま す。 3.「0.1wt%超」または「0.01wt%超」は、特定化学物質の含有率が日本工業規格JIS C 0950:2008 に記載されている含有率基準値を超えていることを示します。 A Japanese regulatory requirement, defined by specification JIS C 0950: 2008, mandates that manufacturers provide Material Content Declarations for certain categories of electronic products offered for sale after July 1, 2006.
SOUTH KOREA Radio Research Agency (RRA) R-R-NVA-P3450 R-R-NVA-P3448 이 기기는 가정용(B급) 전자파적합기기로서 주 로 가정에서 사용하는 것을 목적으로 하며, 모 든 지역에서 사용할 수 있습니다.
① 제품의 종류는 "전기.전자제품 및 자동차의 자원순환에관한 법률 시행령" 제 8조 제 1항 및 제 2항에 따른 품목별로 구분하여 기재합니다. ② 전기 전자 제품의 경우 모델명 (번호), 자동차의 경우, 제원관리번호를 기재합니다. ③ 해당제품의 제조업자 또는 수입업자를 기재합니다. Confirmation and Evaluation Form Concerning the Adherence to Acceptable Standards of Hazardous Materials Contained in Products Statement Prepared by Company Name: Nvidia HongKong Holding Ltd.
RUSSIA/KAZAKHSTAN/BELARUS Customs Union Technical Regulations (CU TR) This device complies with the technical regulations of the Customs Union (CU TR) This device complies with the rules set forth by Federal Agency of Communications and the Ministry of Communications and Mass Media Federal Security Service notification has been filed. TAIWAN Bureau of Standards, Metrology & Inspection (BSMI) This device complies with CNS 13438 (2006) Class B.
主動電子零件 Active components 被動電子零件 Passive components 存儲設備 Memory 機械部件 Mechanicals 連接器/線材 Connectors/Cable 焊接金屬 Soldering material 助焊劑，錫膏，標籤及耗材 Flux, Solder Paste, label and other consumable materials - O O O O O - O O O O O O O O O O O - O O O O O - O O O O O O O O O O O O O O O O O 備考1：O：系指該限用物質未超出百分比含量基準值 Note 1： O：indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.
处理器 Processor O O O O O O 主动电子零件 Active components X O O O O O 被动电子零件 Passive components X O O O O O 存储设备 Memory 机械部件 Mechanicals O O O O O O X O O O O O 连接器/线材 X O Connectors / Cable 焊接金属 O O Soldering material 助焊剂，锡膏，标签及耗 材 O O Flux, Solder Paste, label and other consumable materials 本表格依据SJ/T 11364-2014 的规定编制 The table according to SJ/T 11364-2014 O O O O O O O O O O O O O：表示该有害物质在该部件所有均质材料中的含量均在GB/T 26572-2011 标准规定的限量要求 以下。 O: Indicates that this hazardous
and 0.01 weight % for cadmium, except for where allowed pursuant to the exemptions set in Schedule 2 of the Rule. Sr. No . i. Product Category & Code (as Per Schedule I of EWaste (M) Rules, 2016 ITEW2 India RoHS Self-Declaration Form (as per E-Waste (Management) Rules, 2016) Product name Mode l No.
Notice © 2017-2019 NVIDIA Corporation. All rights reserved. NVIDIA, the NVIDIA logo, Jetson, Jetson Nano, and JetPack are trademarks and/or registered trademarks of NVIDIA Corporation in the U.S. and other countries. Other company and product names may be trademarks of the respective companies with which they are associated. NVIDIA DESIGN SPECIFICATIONS, REFERENCE BOARDS, FILES, DRAWINGS, DIAGNOSTICS, LISTS, AND OTHER DOCUMENTS (TOGETHER AND SEPARATELY, "MATERIALS") ARE BEING PROVIDED "AS IS.
