Datasheet

BeagleBone_Green_Wireless.md 3/7/2023
14 / 25
Operating System USB Drivers Comments
Linux mkudevrule.sh Driver installation isn't required, but you might find a few udev rules helpful.
For window system, please note that:
Windows Driver Certification warning may pop up two or three times. Click "Ignore", "Install" or "Run"
To check if you're running 32 or 64-bit Windows see this.
On systems without the latest service release, you may get an error (0xc000007b). In that case, please install and
retry:
You may need to reboot Windows.
These drivers have been tested to work up to Windows 10
STEP3. Browse to your Beagle
Using either Chrome or Firefox (Internet Explorer will NOT work), browse to the web server running on your board. It will
load a presentation showing you the capabilities of the board. Use the arrow keys on your keyboard to navigate the
presentation.
Click http://192.168.7.2 to launch to your Seeed Studio BeagleBone® Green Wireless. Older software images require you
to EJECT the BeagleBone® drive to start the network. With the latest software image, that step is no longer required.
STEP4. Cloud9 IDE
To begin editing programs that live on your board, you can use the Cloud9 IDE by click
STEP5. Connect your Seeed Studio BeagleBone® Green Wireless to Wi-Fi
Using your smart phone or computer to scan local Wi-Fi network and connect to the AP named "BeagleBone® XXX"