Datasheet
28
LDC1612
,
LDC1614
SNOSCY9A –DECEMBER 2014–REVISED MARCH 2018
www.ti.com
Product Folder Links: LDC1612 LDC1614
Submit Documentation Feedback Copyright © 2014–2018, Texas Instruments Incorporated
7.6.27 Address 0x19, ERROR_CONFIG
Figure 40. Address 0x19, ERROR_CONFIG
15 14 13 12 11 10 9 8
UR_ERR2OUT OR_ERR2OUT WD_
ERR2OUT
AH_ERR2OUT AL_ERR2OUT RESERVED
7 6 5 4 3 2 1 0
UR_ERR2INT OR_ERR2INT WD_ERR2INT AH_ERR2INT AL_ERR2INT ZC_ERR2INT Reserved DRDY_2INT
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset
Table 26. Address 0x19, ERROR_CONFIG
Bit Field Type Reset Description
15 UR_ERR2OUT R/W 0 Under-range Error to Output Register
b0: Do not report Under-range errors in the DATAx_MSB
registers.
b1: Report Under-range errors in the DATAx_MSB.ERR_URx
register field corresponding to the channel that generated the
error.
14 OR_ERR2OUT R/W 0 Over-range Error to Output Register
b0: Do not report Over-range errors in the DATAx_MSB
registers.
b1: Report Over-range errors in the DATAx_MSB.ERR_ORx
register field corresponding to the channel that generated the
error.
13 WD_ ERR2OUT R/W 0 Watchdog Timeout Error to Output Register
b0: Do not report Watchdog Timeout errors in the DATAx_MSB
registers.
b1: Report Watchdog Timeout errors in the
DATAx_MSB.ERR_WDx register field corresponding to the
channel that generated the error.
12 AH_ERR2OUT R/W 0 Amplitude High Error to Output Register
b0:Do not report Amplitude High errors in the DATAx_MSB
registers.
b1: Report Amplitude High errors in the DATAx_MSB.ERR_AEx
register field corresponding to the channel that generated the
error.
11 AL_ERR2OUT R/W 0 Amplitude Low Error to Output Register
b0: Do not report Amplitude High errors in the DATAx_MSB
registers.
b1: Report Amplitude High errors in the DATAx_MSB.ERR_AEx
register field corresponding to the channel that generated the
error.
10:8 Reserved R/W 00 Reserved. Set to b00.
7 UR_ERR2INT R/W 0 Under-range Error to INTB
b0: Do not report Under-range errors by asserting INTB pin and
STATUS register.
b1: Report Under-range errors by asserting INTB pin and
updating STATUS.ERR_UR register field.
6 OR_ERR2INT R/W 0 Over-range Error to INTB
b0: Do not report Over-range errors by asserting INTB pin and
STATUS register.
b1: Report Over-range errors by asserting INTB pin and
updating STATUS.ERR_OR register field.
5 WD_ERR2INT R/W 0 Watchdog Timeout Error to INTB
b0: Do not report Watchdog errors by asserting INTB pin and
STATUS register.
b1: Report Watchdog Timeout errors by asserting INTB pin and
updating STATUS.ERR_WD register field.
4 AH_ERR2INT R/W 0 Amplitude High Error to INTB
b0: Do not report Amplitude High errors by asserting INTB pin
and STATUS register.
b1: Report Amplitude High errors by asserting INTB pin and
updating STATUS.ERR_AHE register field.