Datasheet

 2015-2017 Microchip Technology Inc. DS20005426C-page 35

MCP9600

5.3.4 DEVICE ID AND REVISION ID

The Device ID and Revision ID register is a 16-bit

read-only register, which can be used to identify this

device among other devices on the I

C bus. The upper

8 bits indicate the Device ID of 0x40, while the lower

8 bits indicate the device revision. The device revision

byte is divided into nibbles, where the upper nibble

indicates the major revision and the lower nibble

indicates minor revisions for each major revision. The

initial release is indicated by a major revision of ‘1’ and

a minor revision of ‘0’ or 0x4010.

R-0 R-1 R-0 R-0 R-0 R-0 R-0 R-0

Device ID

bit 15 bit 8

R-0 R-0 R-0 R-1 R-0 R-0 R-0 R-0

Major Minor

bit 7 bit 0

Legend:

R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’

-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15-8 Device ID: Device ID bits (0x40, Hex)

bit 7-0 Revision: Major/Minor Revision ID bits (0x10, Hex)

Release, Revision 1.0.