Datasheet

Preliminary Data Sheet
BMA400
Page 55 /
Confidential
BST-BMA400-DS000-00 | Version 0.1 | November 2017 Bosch Sensortec
© Bosch Sensortec GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties.
BOSCH and the symbol are registered trademarks of Robert Bosch GmbH, Germany.
Note: Specifications within this document are subject to change without notice.
4.8. Soft-Reset
A softreset can be initiated at any time by writing the command softreset (0xB6) to register CMD. The
softreset performs a fundamental reset to the device which is largely equivalent to a power cycle.
Following a delay, all user configuration settings are overwritten with their default state (setting stored
in the NVM) wherever applicable. This command is functional in all operation modes but must not be
performed while NVM writing operation is in progress.
Confidential and under NDA
Seeed Studio
Confidential and under NDA
Seeed Studio
Confidential and under NDA