Grove Temperature&Humidity Sensor (HDC1000) Release date： 10/27/2015 Version： 1.0 Wiki: http://www.seeedstudio.com/wiki/Grove_-_Temperature&Humidity_Sensor_(HDC1000) Bazaar: http://www.seeedstudio.com/depot/Grove-TemperatureHumidity-Sensor-HDC1000-p2535.
Document Revision History Revision Date Author Description 1.0 Sep 21, 2015 Victor.
Contents Document Revision History ··································································································2 1. Introduction ···················································································································5 2. Features ·························································································································6 3.
Disclaimer For physical injuries and possessions loss caused by those reasons which are not related to product quality, such as operating without following manual guide, natural disasters or force majeure, we take no responsibility for that. Under the supervision of Seeed Technology Inc., this manual has been compiled and published which covered the latest product description and specification. The content of this manual is subject to change without notice.
1. Introduction Grove – Temperature & Humidity Sensor (HDC1000) utilizes a HDC1000 sensor.HDC1000 was designed by Texas Instruments. It is a digital humidity sensor with integrated temperature sensor that provides excellent measurement accuracy at very low power. The device measures humidity based on a novel capacitive sensor. The humidity and temperature sensors are factory calibrated. The innovative WLCSP (Wafer Level Chip Scale Package) simplifies board design with the use of an ultra-compact package.
2.
3. Specification Item Min Typical Max Unit Supply Voltage 3 / 5 VDC Working Current 0.12 / 90 uA Relative Humidity Accuracy (Typ) / ±3 Relative Humidity Operating Range (Typ) 0 / 100 %RH Temperature Accuracy / ±0.
4. Interface Function 1. 2. 3. 4. Grove connector. Ready：Ready for a conversion. Default address: 0x40.
5. Applications Here is how to use Grove – Temperature & Humidity Sensor (HDC1000) with Seeeduino Lotus. 5.1 Hardware Installation 1. 2. Part lists: Seeeduino Lotus v1.0 or other Microcontroller development board that combination of Seeeduino. Grove – Temperature & Humidity Sensor (HDC1000). Hardware linking is very easy. Grove – Temperature & Humidity Sensor (HDC1000) communicate over I2C.Connecting Grove – Temperature & Humidity Sensor (HDC1000) and Seeeduino Lotus v1.0 by Grove cable, as the following.
6. Resources File:Grove - Temperature&Humidity Sensor(HDC1000) v1.0 sch pcb.zip File:Grove - Temperature&Humidity Sensor(HDC1000) v1.0 sch.pdf Demo code HDC1000_DataSheet.
