Datasheet

7
/*
Grove-Temperature-Humidity Sensor
Read value from grove-temperature-humidity sensor then display on grove-
4-digital-display
The circuit:
* 4-digital-display attached to pin38 & pin39 (J14 plug on Grove Base
BoosterPack)
* sig pin of the Grove-Temperature-Humidity Sensor to the analog pin 24
(Grove connector J6)
* one side pin (either one) to ground
* the other side pin to +VCC
* LED anode (long leg) attached to RED_LED
* LED cathode (short leg) attached to ground
* Note: Put your hands on Grove-Temperature-Humidity Sensor, both of the
value
will rise.
4-digital-display:
|--------------------------|
| temperature : humidity |
|--------------------------|
This example code is in the public domain.
http://www.seeedstudio.com/wiki/Grove_-
_Temperature_and_Humidity_Sensor_Pro
*/