INSTRUCTION MANUAL IRONING STEAM PRESS MODEL NO.: Professional 100HD,Professional 90HD,Professional 80HD.
EN Before operating this unit,please read this instruction manual carefully .This product is for household use only. The user must not leave the iron unattended while connected to the supply. The plug of supply cord must be removed from the socket outlet before the water reservoir is filled with water. The filling aperture must not be opened during use. Safe refilling of the water reservoir The iron must be used and rested on a stable surface.
the filling cap must not be removed during use EN Important Safety Tips The below safety tips should be considered carefully while using press iron. -Read all the instructions with full care before use - Use press iron only for home applications -Make sure that the information on the label of its bottom accords with your home electricity before plugging in - Use earth-connection outlet to secure yourselves -Iron should be always off before plugging in or out -Never pull cord for plugging out.
EN The Technical Specifications of Press Iron Model No. :Professional 100HD,Professional 90HD,Professional 80HD. - 220-240V~50/60Hz,2200W - Steam output: 90 g / min -Booster: steam strengthening: 120 g/min -Security system of electricity: If press part is close for ten minutes or open and out of use for some minutes, electricity system will be cut off automatically. - Steam readiness: in 2.5 minutes -Equipped with water tank along with the indicator of water level -Capacity of water tank: 0.
EN Main Parts 1- Locking keys for closing and carrying iron 2- Control sheet including A Select key for selection of fabric material B Steam key C Booster key for stronger steam 3- Handle for opening/ closing press sheet and pressing by heated sheet and automatic control of steam 4- Heated sheet 5- Iron sheet covered with sponge and coating 6- Water tank and anti-scale cartridge 7- ON/OFF switch 8- Cushion for ironing sleeves or shoulders EN 5
Installation 1-Open carton and take press iron out . 2- Put press iron on a flat, firm and heat-resistant surface. Iron-only base or a table or a compatible stand is suitable. How to use the press iron 3-Your appliance is equipped with security lock to avoid accidentally opening. Lift 2 locking keys as soon as press down gently the handle ,the appliance lifts up automatically .Lift handle further by hand to make the heated sheet fixed in biggest open angle,now the iron is open.
In the appliance,there is a unique anti-sediment cartridge to make the best steam function.Water can be distilled by this cartridge automatically. To install the anti-sediment cartridge ,take out the water tank,put the anti-sediment cartridge into the water tank,twist it clockwise to lock it well,then insert water tank into the base. How to replace the anti-sediment cartridge in water tank The appliance can detect the water distilled by this cartridge.
Never try to use steam when tank is empty as it hurts pump. Never fill tank with hot water. Never add the materials containing alcohol, fragrant essences and so on to water. Preparation Plugging iron in Connect one side of the cord to the back of iron and another one to outlet. Turn appliance on. Make sure that earth-connection is in good working order for your security. 11-ON/OFF Key After plugging in, press main ON/OFF key.
Pressing 15- Spread your material or cloth on iron sheet. 16-Move heated sheet down by handle. When it gets to half-closed manner this appliance produces steam automatically until whenever it is necessary. 17- Close iron for pressing automatically. Keep iron closed for some seconds in order for the cloth to be dry and ironed completely. 18- Open iron by lifting handle up. 19- Do not press handle more than usual while closing press. Press happens automatically.
If iron is close for 15 seconds or open and out of use for some minutes, electricity system will be stopped automatically. Heating system will restart working by opening iron. 21-Easy Carriage By all means lock the appliance before moving. Keep iron closed and press down 2 locking buttons. 22-After you finish ironing wait for 30 minutes in order for iron to be cool and then close it. Note: Before carrying or putting iron in standing position, make water of tank empty to prevent pouring.
