User Manual

SEEDHAWK®TOOLBAROPERATOR’SMANUAL50
7.0 MAINTENANCE

7.1 HYDRAULICCARTRIDGES

Hydrauliccartridges, FIGURE29,whichis located onhydraulicblock,should onlyberemoved,
inspected and cleaned at the end of each seeding season if problems occur with them. Some
cartridgesmaybedisassembledforadditionalaccessforcleaning.Itisrecommendedthatthe
disassemblyandfurthercleaningofthis
typeofcartridgebeperformedbya techniciantrained
inhydrauliccomponentservicing.
7.2 HYDRAULICCYLIN D ERS

Inspect hydrauliccylindersealsandhoseconnectionsat cylinderfittingsevery10hrsordaily.
Tighten any loose fittings, FIGURE 30.Cylinder seals are replaceable. Contact a technician
trained in hydraulic maintenance and repairs if assistance is required for replacing cylinder
seals.
FIGURE 29
FIGURE30
SEALS
HOSEFITTINGS
CYLINDER