User Manual
Table Of Contents
- 1.0 INTRODUCTION
- 2.0 SAFETY
- 3.0 SPECIFICATIONS
- 4.0 OPERATION
- 4.1 FIELD OPERATION
- 4.2 TRACTOR HOOK UP
- 4.3 HYDRAULIC HOSE HOOK UP
- 4.4 HYDRAULIC MANIFOLD DESCRIPTION
- 4.5 PRE-OPERATION CHECKLIST
- 4.6 WINGING THE 7-PLEX MACHINE DOWN
- 4.7 PRIMARY OPERATION
- 4.8 PRIMARY OPERATION VARIABLES
- 4.9 SUPPLY AND DROP TUBES
- CROP RESIDUE CONSIDERATIONS
- 4.11 SEED HAWK PACKER TIRE
- 4.12 SIDE BANDING WITH ANHYDROUS AMMONIA WHILE SEEDING
- 4.13 DROP TUBE EXTENSION with NH3
- 4.14 PLACING PHOSPHATE FERTILIZER WITH SEED
- 5.0 LIQUID SYSTEM OPERATION
- 6.0 SBR HITCH
- 7.0 MAINTENANCE
- 8.0 TROUBLE-SHOOTING
- SCHEMATICS
- 9.1 2 STATION HYDRAULIC MANIFOLD (2012)
- 9.2 XL SERIES 5 PLEX MAIN HYDRAULICS (2012)
- 9.3 XL SERIES 71’8” – 10 & 72’ – 12 MAIN HYDRAULICS (2012)
- 9.4 XL SERIES 80’ & 84’ MAIN HYDRAULICS W/INTENSIFIER (2012)
- 9.5 30’ 45 SERIES HYDRAULICS (2012)
- 9.6 40’/50’/60’ 45 SERIES HYDRAULICS (2012)
- 9.7 XL SERIES 5 PLEX SCT HYDRAULICS (TBT) (2012)
- 9.8 XL SERIES 5 PLEX SCT HYDRAULICS (TBH) (2012)
- 9.9 XL SERIES 7 PLEX SCT HYDRAULICS (TBT) (2012)
- XL SERIES 7 PLEX SCT HYDRAULICS (TBH) (2012)
- 9.11 50’/60’ 45 SERIES SCT HYDRAULIC (TBT) (2012)
- 9.12 50’/60’ 45 SERIES SCT HYDRAULICS (TBH) (2012)
- 9.13 OPENER HYDRAULICS FOR SCT TOOLBARS (2012)
- 9.14 SEED BETWEEN ROW HYDRAULICS
- 9.15 SEED BETWEEN ROW HYDRAULIC MODEL
- 9.16 CONTROL BOX (SWITCH BOX)
- 9.17 TOOL BAR WIRING HARNESS
- 10.0 WARRANTY
- 11.0 NOTES
- 12.0 INDEX
Seed Hawk Manual Tool Bar Page 9
2.6 TRANSPORT SAFETY
• Ensure that drill is attached to tractor properly.
• Ensure drawbar hitch pin retainer is in place and functioning properly.
• Ensure safety tow chain is securely attached to tractor.
• Ensure all lighting and implement marking devices are intact and visible.
• Ensure implement is properly marked according to local road regulations.
• Heed all local road traffic regulations.
• Do not exceed 32 km/h (20 mi/hr).
• Reduce travel speed on rough roads and surfaces.
• Do not allow riders on the implement at any time.
2.7 STORAGE SAFETY
• Store the implement away from areas of human activity.
• Do not allow children to play on or around implement.
• Store the implement on a firm, stable and level surface.
• If implement is stored outside, leave toolbar in field position. (Wings down)
• Leave dump line unrestricted during storage (damage could occur to
gauges)
2.8 TIRE SAFETY
• Ensure tire inflation pressure is maintained per specifications.
• Follow proper procedures for tire repairs, especially when mounting tire to
rim.
• Seek assistance from a trained person for tire repairs or mounting,
especially if special equipment is required.