User Manual
Table Of Contents
- 1.0 INTRODUCTION
- 2.0 SAFETY
- 3.0 SPECIFICATIONS
- 4.0 OPERATION
- 4.1 FIELD OPERATION
- 4.2 TRACTOR HOOK UP
- 4.3 HYDRAULIC HOSE HOOK UP
- 4.4 HYDRAULIC MANIFOLD DESCRIPTION
- 4.5 PRE-OPERATION CHECKLIST
- 4.6 WINGING THE 7-PLEX MACHINE DOWN
- 4.7 PRIMARY OPERATION
- 4.8 PRIMARY OPERATION VARIABLES
- 4.9 SUPPLY AND DROP TUBES
- CROP RESIDUE CONSIDERATIONS
- 4.11 SEED HAWK PACKER TIRE
- 4.12 SIDE BANDING WITH ANHYDROUS AMMONIA WHILE SEEDING
- 4.13 DROP TUBE EXTENSION with NH3
- 4.14 PLACING PHOSPHATE FERTILIZER WITH SEED
- 5.0 LIQUID SYSTEM OPERATION
- 6.0 SBR HITCH
- 7.0 MAINTENANCE
- 8.0 TROUBLE-SHOOTING
- SCHEMATICS
- 9.1 2 STATION HYDRAULIC MANIFOLD (2012)
- 9.2 XL SERIES 5 PLEX MAIN HYDRAULICS (2012)
- 9.3 XL SERIES 71’8” – 10 & 72’ – 12 MAIN HYDRAULICS (2012)
- 9.4 XL SERIES 80’ & 84’ MAIN HYDRAULICS W/INTENSIFIER (2012)
- 9.5 30’ 45 SERIES HYDRAULICS (2012)
- 9.6 40’/50’/60’ 45 SERIES HYDRAULICS (2012)
- 9.7 XL SERIES 5 PLEX SCT HYDRAULICS (TBT) (2012)
- 9.8 XL SERIES 5 PLEX SCT HYDRAULICS (TBH) (2012)
- 9.9 XL SERIES 7 PLEX SCT HYDRAULICS (TBT) (2012)
- XL SERIES 7 PLEX SCT HYDRAULICS (TBH) (2012)
- 9.11 50’/60’ 45 SERIES SCT HYDRAULIC (TBT) (2012)
- 9.12 50’/60’ 45 SERIES SCT HYDRAULICS (TBH) (2012)
- 9.13 OPENER HYDRAULICS FOR SCT TOOLBARS (2012)
- 9.14 SEED BETWEEN ROW HYDRAULICS
- 9.15 SEED BETWEEN ROW HYDRAULIC MODEL
- 9.16 CONTROL BOX (SWITCH BOX)
- 9.17 TOOL BAR WIRING HARNESS
- 10.0 WARRANTY
- 11.0 NOTES
- 12.0 INDEX
Seed Hawk Manual Tool Bar Page 6
2.3 GENERAL SAFETY PRACTICES
• Read and understand the contents of this Operator’s Manual prior to
operating, adjusting, maintaining and/or repairing the implement.
• Locate, read and understand all safety signs applied to the implement
before performing any tasks.
• Review the contents of this Operator’s Manual at least annually, and any
time a new person is assigned to perform any task with the implement.
• Ensure that all bystanders, especially small children, are kept at a safe
distance while performing any tasks with the implement.
• Do not allow riders on any part of the implement.
• Ensure all guards and shields are intact and in place prior to operating the
implement.
• Keep hands, feet, hair and loose clothing away from moving and/or rotating
parts.
• Stop the engine, lower the implement, set the parking brake, remove the
ignition key, and allow time for moving parts to stop prior to adjusting,
maintaining or repairing the implement.
• Ensure that all implement lighting and marking is intact, clean and operating
properly prior to traveling on public roads. Check with local highway
authorities to confirm implement is properly equipped for highway travel.
• Provide a fully stocked First-Aid kit in a highly visible and easily accessible
location.
• Keep a fully charged fire extinguisher in a highly visible and easily
accessible location.
• Ensure that implement is securely blocked and supported prior to working
underneath.