Manual
Seed Hawk Manual Tool Bar Page 17
3.2 TIRE PRESSURE
Use the following chart to check and adjust, if necessary, tire pressure.
TireSize Description PSIRating
480x400x8 PackerTire20PSI
11L15WingTire(FrontandRear)36PSI
12.5L15MainFrameCastorTire(Front) 44PSI
19.0/45x17FrontMainFrameCastor58PSI
500/45x22.5 RearAxleTire52PSI
30.5L32SAT(Single) RearAxleTire26PSI
30.5L32SAT(Inner
Dual)RearAxleTire26PSI
30.5L32SAT(Outer
Dual)RearAxleTire16PSI
NOTE: Proper inflation of tire pressure contributes to longer tire life and proper
flotation for field operations. Tire inflation pressures listed are recommended
initial settings. Some soil conditions and operating environments may dictate
deviation (on Packer Tires Only) from the recommended settings. Contact
Seed Hawk
for additional information and advice if needed.
NOTE:
If you do change your tire pressure, ensure that your opener is correctly placing your seed
at the depth you require.
3.3 TRACTOR REQUIREMENTS
Tractor Hydraulic Circuit Requirements
Circuit #1 Shank Lift/Lower (intermittent)
<40’ (12.2 m) Flow Rate 2-3 gal-US/min
40’+ (12.2 m) Flow Rate 3-4 gal-US/min
Circuit #2 Hydraulic Manifold (continuous)
Model: SH Tool Bar Flow Rate 3-4 gal-US/min (11.3-18.9 L/min)
Rear Steering (option) 3 gal-US/min (11.3 L/min)
SBR Hitch 2-3 gal-US/min
Low Pressure Tank Line(s) Tractor Reservoir 3-5 gal-US/min (11.3-18.9
L/min)
IMPORTANT!
The low pressure return must
enter tractor reservoir directly.