Manual

Appendix B
226 Seed Hawk® Viper Pro™ Installation & Operation Manual
AutoBoom Alarms
The AutoBoom Alarms folder is created but is not used with the Seed Hawk systems. For a description of the
AutoBoom feature and this folder, refer to the Raven Viper Pro Installation & Operation Manual.
BoundaryShp Folder
The boundaryShp folder contains any shapefiles for field boundaries created using GIS software and
transferred to the Viper Pro field computer.
Note: Field Boundaries created using the Viper Pro are saved as a part of the job file. Shapefiles within
this folder must have the .shp, .shx, and .dbf extension.
Clone Folder
The clone sub-folder will only appear on the USB drive and only if a clone of the Viper Pro has been created.
Clones may be used as “restore points” to quickly and easily reset the Viper Pro field computer to a previous
set up. A clone will contain the following files contained within the Viper Pro file structure:
Refer to Clone or Restore Settings section on page 208 for instructions on using clone files.
CovMaps Folder
The covMaps folder contains product coverage map files that have a .cov extension. Viper saves one coverage
file for each product and each job.
These files are stored in a proprietary binary format and are not viewable.
GuidanceArchive Folder
The GuideArchive folder contains the guidance A-B lines saved in files with a .ab extension. Store any
previously created A-B lines in this folder.
These files are stored in a proprietary binary format and are not viewable.
• Coverage Maps • Job files
• Prescription Maps • Report files
• Streetmaps • Boom Configuration
• Scout Maps • Switch Box Configuration
• A-B Lines • Comm Port settings