Owner's manual

Manual No. 016-3001-003 55

CAN (Controller Area Network) Setup

8. Press OK. Viper Pro saves the changes.

Note: Field volume, field area, and tank volume can be reset while in a job. Total volume and total area

can only be reset while a job is not in progress.

CAN Profile

A CAN profile stores the various settings for the CANbus system (i.e. speed, meter, and rate cals) stored on

the CAN nodes. Create a CAN profile to quickly restore settings for various types of product or seed being

applied.

CAN profiles store the following settings and values for each product on the CANbus:

Note: Some of these settings are only applicable to optional liquid products on the CANbus.

To create a CAN profile:

1. Touch the Product Control area on the main screen.

2. Touch the CAN Profile button at the bottom of the CAN Controller Status screen.

• Dual Flow % • Agitator • Pump Cal

• Off Rate % • Ratio Rate • Min PW

• Low Tank • Rate Cal • Max PW

• Low Limit • Rate Bump (+/-) • Preset PW

• Tank Volume • Meter Cal • PW Frequency

• Flow/Shaft Alarm • Product Density • Ratio Rate Cal

• Vac/Bin Alarm • Spreader Constant • Valve Delay

• Decimal Shift • Valve Cal 1 • PWM

• Zero Shutoff • Valve Cal 2 • Max PSI

• Display Smoothing • Fan Cal • Cal Weight