Owner's manual

Manual No. 016-3001-003 27

CAN (Controller Area Network) Setup

Miscellaneous Settings Area

The following readings and settings are displayed in the Miscellaneous area:

• Speed Sensor/Source

• Speed Cal

• Self Test

• Packing Pressure or Pump RPM

• Speed (Display only)

• Units

The Miscellaneous area on the CAN Controller Status screen displays an overview of the selections and

settings accessible by touching within the Miscellaneous area.

Speed Display

Speed is a display only. The Speed read out displays the current ground speed of the vehicle or the entered

Self Test Speed. See the Using the Calibration Assistance: section on page 29 for information on entering and

using a Self Test Speed.

Note: The speed display on the Viper Pro and the vehicle speedometer may display different values

during an application, especially if a gear tooth speed sensor mounted on the air cart is used to

determine application speeds.