User Manual

Chapter 3
44 Seed Hawk™ Viper Pro™ Installation & Operation Manual
For product nodes 4 and 5, the following settings will be displayed in Data Box 2:
Note: The following sections offer descriptions of the various options and settings used with products 4
and 5. For descriptions of the settings used with products 1 through 3, see the Data Box 2 for
Products 1-3 section on page 39.
Data Box 2 Displays
Data Box 2 displays the current value for the following items during an application:
Area/Hour
Displays the area per hour of product application. This is a display only.
Vol/Min
Displays the volume per minute of product application. This is a display only.
PWM
Displays the current duty cycle of the PWM valve.
Node Settings Screen (Page 1)
Touch within the Data Box 2 to view the first Settings screen for the selected node.
• Ta nk V o l u m e • Spreader (Constant) • Pre Set PW
• Area/Hour (Display only) • Valve C al • PW Freq
• Vol/Min (Display only) • Valve Cal 2 • Ratio Rate
• Rate Cal • Fan/Pump Cal • Valve Delay
• Rate Bump (+/-) • Min PW • PWM (Display only)
• Meter Cal/Density • Max PW