Manual
SEED HAWK
®
2015 LOUP III & VIPER PRO™ HYDRAULIC DRIVE CALIBRATION GUIDE i
The data presented in this manual for calibration numbers has been obtained by Seed Hawk Inc. from factory
testing as well as eld testing and from customers. These values are based on averages obtained and do not
necessarily account for temperature, density, moisture content, seed size, shape or treatment. Using a prede-
termined calibration value does not guarantee accurate application rates, but the values can be used to avoid
static calibration procedures but note that further verication of application rates is a MUST. Follow the Rate
Check Procedure outlined on pg. 34 of this booklet.
The calibration numbers provided are a starting point only, application rate verication is needed and highly
recommended. Modication to the calibration number is needed to achieve desired accuracy. Once accurate
application rates are achieved, it is highly recommended that these values are recorded in the pages provided
for future reference.
Disclaimer