Manual

Seed Hawk
®
Manual Calibration Guide 17
Toggle to “START CALIBRATION” and select “ENTER”, this
will cause the roller to turn at the same RPM as set in the Prime
step.
Once a sample is collected (the larger the sample the more
accurate the calibration) Select “END”, this will stop the roller.
Weigh the filled calibration bucket, enter the weight of the
product caught. Toggle the “LEFT” and “RIGHT” keys moving
the arrow under the desired digit to edit, select “ENTER” to
modify the digit. Toggle between “INC” and “DEC” to change
the digit value.