Owner manual

Table of Contents
1.0 Introduction 3-5
1.1 Description of the Machine 4
1.2 Illustration of the Machine 4
1.3 Serial Number 5
2.0 Safety 6-15
2.1 Safety Alert Symbols 6
2.1.1 Signal Words 6
2.2 Operator Responsibility 7
2.2.1 Key Safety Reminders 7
2.3 General Safety Practices 8
2.4 Maintenance Safety 9
2.5 Hydraulic Safety 10
2.6 Transport Safety 11
2.7 Storage Safety 11
2.8 Tire Safety 11
2.9 Safety Signs & Locations 12
2.9.1 Applied Safety Signs 13
2.9.2 Safety Sign Information 14-15
3.0 Specifications 16-17
3.1 Hardware Torque 16
3.1.1 SAE 16
3.1.2 Metric 16
3.1.3 Flare-Type Tube Fittings 16
3.2 Tire Pressure 17
4.0 Operation 18-26
4.1 Fill Auger 18
4.1.1 Positioning the Auger 19
4.1.2 Operating the Auger 20
4.1.3 Auger Position for Unloading Air Tank 20
4.1.4 Auger Transport Position 21
4.2 Fan(s) 22
4.3 Case Drain(s) 22
4.3.1 Average hydraulic requirements 22
4.4 Metering Roller 23
4.5 Pressurized Metering System 24
4.6 Checking Air and Product Flow 25
4.7 Ground Drive Metering 26
5.0 Liquid System Operation 27-35
5.1 Liquid Fertilizer System 27
5.2 System Flow Description 28
5.3 Filling the Liquid Fertilizer Tank 29
5.4 Liquid Fertilizer Application Rate 29
5.5 Checking Fertilizer Runs 30
5.6 Applying Liquid Fertilizer 30
5.7 Agitate Liquid Fertilizer 31
5.7.1 To Agitate Tank Contents 31-32
5.8 Liquid Fertilizer Application Rates 33
5.8.1 Pump Settings 34
5.9 Liquid Pump Gear Ratios 35
5.9.1 Orifice Selection Table 35