Owner's manual

SEED HAWK

2015 AIRCART OPERATOR’S MANUAL

7.5.5 Seeder Stationary Mode

NOTE: This selection must

be disabled before actual

seeding is started.

This selection allows the operator to enter a fake ground speed so the entire

system can be run for a system checkout before entering the eld. The entire

system must be functional to use this selection.

1. Using the Navigation Keys or the

Selector Knob, highlight and select

“Seeder Stationary Mode.”

4. Increment: This value is the increment value for on the go rate adjust-

ments when seeding. The default value is 5.00 lb/ac.

5. OK/Cancel: Select “OK” to save any changes made. Select “Cancel” to

ignore any changes made.

4. Select “Enable” and enter a fake

ground speed.

2. Dialogue box will appear displaying

status. Using the Selector Knob

highlight “Disabled” and press to open.

3.Using the Navigation Keys or

Selector Knob, highlight “Enable.”

Conrm selection by pressing the

Selector Knob or the Enter Key.