Owner's manual

SEED HAWK

2015 AIRCART OPERATOR’S MANUAL

4.9 Checking Air & Product Flow

The test procedure outlined below serves as a guideline for ensuring proper fan

speed for effective delivery of product:

1. Remove hose(s) from an outside opener and temporarily attach to the frame

of the seeder with the hose looping no more than 12 in. (300mm) below the

frame.

2. Begin seeding at normal eld speed and observe distance product discharges

from hose(s) attached to the frame. All product should discharge within a

range of 12-24 in. (300-600mm).

3. Adjust fan speed, if necessary, to ensure optimum air ow for product dis-

charge.

DO NOT set fan speed above 5000 rpm. Excessive fan speed will

damage the fan drive motor and requires more power from the trac-

tor hydraulic system.