Owner manual

SEED HAWK
®
2014 AIRCART OPERATOR’S MANUAL SEED HAWK
®
2014 AIRCART OPERATOR’S MANUAL46
Pressing the OK Soft Key, the Enter
Key or the Toggle will allow the user
to exit the menu.
To edit the contrast simply use the
Selector Knob or any of the Navi-
gation Keys to increase or decrease
the contrast.
Press the Enter Key or the Toggle-
Dial to accept the change and exit.
To access from the Main
Menu Run Screen, press any
soft key to bring up the Soft
Key Menu, press “Setup”,
then “Version”.
7.3.1 System Status Menu
7.3.2 Contrast Menu
7.3.3 Version Menu
This Soft Key Menu displays the current status state of the system. This menu
is benecial when checking communications and/or connections. This menu is
“view only”.
Using the Selector Knob or the
Navigation Keys allows the user to
view sensors that do not t on the
main screen.
This Soft Key Menu is quick access to view and/or change the current contrast
setting.
This Soft Key Menu displays the
current rmware version as well as
the date and times it was released for
production.
To access from the Main
Menu Run Screen, press any
soft key to bring up the Soft
Key Menu, press “Setup”,
then “Status”.
To access from the Main
Menu Run Screen, press any
soft key to bring up the Soft
Key Menu, press “Setup”,
then “Contrast”.
47
7.3.4 Item Menu
This Soft Key Menu allows the user to select which information is being dis-
played in the User Selectable Display Windows.
1. Begin by pressing the Soft Key
Item. The screen will show a high-
lighted selection box.
2. Using the Navigation Keys or the
Selector Knob, navigate to other
selection boxes. "Meter 1 Application
Rate" has a highlighted selection box
around it.
4. The viewable selections menu is
now displayed. Using the Navigation
Keys or the Selector Knob, cycle
through the list of options to select
which item you would like to view.
In this example, “Meter 1 Application
Rate” is being changed to “Meter 2
Application Rate."
5. Finalize your selection by pressing
the Enter Key or Toggle.
6. Once all changes have been made
in this menu, the operator must select
ESC to exit the menu. Field Acres is
now displayed on the User Selectable
Display Window.
3. Once you have your choice high-
lighted, simply press the Enter Key
or Toggle to bring up the viewable
selections menu.