Owner's manual

SEEDHAWK®AIRCARTOPERATOR’SMANUAL64

Youcanalsoviewtheactualsystempressurewhileseedingbyselectingitasadisplayitem.The
monitorwilldisplaytheapplieddownpressureontherunscreen.REFERTOSECTION7.2.4for
moreinformation.Toaddthistothedisplaypressanyofthesoftkeystobringup
thesoftkey
menu,thenpress“Item”.AhighlightboxwillappearovertheupperLHwindow.Navigatethe
highlight box to the display window you want to place the shank down pressure information
andpress“Enter”.Amenuwillappearwitha listofalltheitemsyou
candisplayin thewindow.
Navigateto“Shank”andpress“Enter”.

NOTE: The window item selection is time limited.If no action is takenafter selecting “Item”
fromthesoftkeymenuthemonitorwillcancelthefunction.

NOTE:Thecorrectitemtypeforthisfunctionis“Shank”.Thereisalsoaselectionchoicecalled
“Pressure”.This is reserved for an optional pressure measurement sensor for use with the
MUXsensorsystem.