Owner's manual

SEEDHAWK
®AIRCARTOPERATOR’SMANUAL63
7.4.5 SHANKPRESSURE
Thehydraulicdownpressureapplied totheopenershanksiscontrolledbyaclosedloopsystem
that allows you to enter the desired operating down pressure. You can enter the amount of
downpressurethesystemshouldapplyonthemonitor.Themonitorcontrolsadownpressure
valvethat maintainsthepressuresettingontheopenershanksthroughthecontrol module.A
pressure sensor measures the actual hydraulic pressure and feeds it back to the control
module.Thecontrolmoduleadjuststhedownpressurevalvetomaintainthesystemsetting.As
theopenersmoveupanddownwiththeterrainconstantforceisappliedtoallequally.

1. To set and change the shank pressure, press any
soft key to bring up the soft key menu and press
“Shank”.

2.Ahorizontalbar graph displaywillcomeupon the
screen. Press “Enter” to activate the adjustment and
thenrotate thespinner knob to increase or decrease
thesystempressuresetting.

3. Press “Enter” again to save  the setting. When
seeding this screen will show the system pressure
settingandatriangularsh apediconwillmoveupand
downthebargraphtoshowthemeasuredsystempressureascomparedtothesetpressure.





















