Owner's manual

SEEDHAWK
®AIRCARTOPERATOR’SMANUAL61
7.4.2 ENGAGEDRIVE
Themonitorrequiresseveralpiecesofinformationforfieldoperation.

1.TheremustbeanImplementwidthentered.

2.Theremustbeameterapplicationrateentered.

3.Theremustbeametercalibrationrateentered.

4.Forwardtravelspeedmustbepresent

5.Thedrivemustbeengaged.


Toengagethedrivepressthe“ACK”button.Thedriveiconintheuppercenterportionofthe
screen will turn solid. Engaging the drive will cause the furrow openers to lower to seeding
positionandwithtravelspeedpresenttheratemeterswillbegintoturn.

NOTE: you must have the fans in operation before engaging the drive. If the fans are not
operatingnormally,analarmscreenwillshowthatcannotbeacknowledged.
7.4.3 DISENGAGEDRIVE
At the end of a seeding pass, Press the “ACK”
buttonagaintodisengagethemeterdrive.Thiswill
stop the application rate meters and raise the
furrow openers. This will stop the acre
accumulationregisteraswell.