Owner's manual

SEEDHAWK
®AIRCARTOPERATOR’SMANUAL60
7.4.1 NORMALOPERATION
ToPowerupturnthemonitor,pressthepowerkey.Themonitorwillgothroughashortstart
up procedure and will display a list of all the sen sors that it recognizes from the installed
system. If a sensor that should be present on the system is not found a warning screen will
displayaskingyouwhatyouwanttodo.Ifmultiplesensorsarenotfoundtherewillbemultiple
warning screens displayed with the first expected sensornotfound showing the first warning
screen.Thiswill followthe order of the sen sor installationscreen.Seetrouble sh ooting guide
forpossiblereasonsthatasensororsensorsarenotfoundatstartup.

Ifalltheinstalledsensorsarefound,themonitorwilldisplayalistoffoundsensorsandyouwill
need to press the soft key labeled “OK”. This will bring up the normal run screen. Items
displayedontherunscreencanbeuserselectedandthelayoutoftherunscreencanalsobe
userselected,REFERTOSECTION7.2.4.Atthispointthesystemisreadyforoperation.