Owner's manual

SEEDHAWK
®AIRCARTOPERATOR’SMANUAL47
5. Sensor Settings:Specific information about each
sensor installed on the MuxBus system can be viewed
byplacingthehighlightbaronthesen sorandpressing
“Settings”.The monitor will display the sensor type
number, communication speed, and serial number.
Sensors with a user settable value have a dialog box
that can be accessed to enter a value. To do this,
navigatetothedialogboxandpress“Enter”.Akeypad
dropdown box will appear. Use the spinner dial or
navigationkeystohighlighttheindividualnumbersyou
wanttoenterstartingwiththeleftmostvalue.

NOTE: You must
press the spinner dial to select
individualnumbers.Youmustpressthe“Enter”button
tosavethecompletevalue.



6. Ignore/Revive: You can temporarily disable
sensors by placing the highlight bar on the
desired sensor selecting Ignore. Re‐enable that
sensor by placing the highlight bar on the
sensor and selecting Revive. This is used to
disable a sensor if a part of the system is not
being used such as a bin that is left empty. By
ignoringthesen soryouwilleliminateunwanted
alarms.