Owner's manual

SEEDHAWK
®AIRCARTOPERATOR’SMANUAL46
2. Plug in the sensors: in the order listed on the
menu. Different sensors have different types and
cannot be learned to the wrong location but the
firstfansensorpluggedinwillbeassignedtoFan1.
ThefirstBinLevelsensorpluggedinwillbelearned
toBin1,etc.Thespeed,pressure,andflowsensors
all use the same type sensor code so the first one
pluggedinwillbethespeedsensor,etc.

3.Addasensor:Individu alsensorscanbeaddedto
theMuxBussystematanytime.Placethehighlight
baronthesensoryouwanttoadd(Fan2inthe
example)andpressinstall.Thenpluginthesensor.
Multiplesensorscanalsobeaddedusingthis
methodbutyouneedtopositionthehighlightbar
oneachnewsensorandpress“Install”before
pluggingineachsensor.



4. Remove a sensor: Individual sensors can be
removedbyplacingthehighlightbaronthesensor
you want to removeandpressing“Remove”. Then
unplugthesensor.

