Owner's manual

SEEDHAWK
®AIRCARTOPERATOR’SMANUAL45
11. Seeder Stationary Mode: This menu choice
allows you to enter a simulated ground speed so
the implement can be operated standing still to
perform operational  checks and trouble shoot
problems







12. Remove all sensors:This menu choice allows
youtoquicklyunlearnallMuxBussensorsinstalled
on the system. This is a ne cessary step if it
becomesnecessarytorelearn theMuxBus system
onamonitorthatsensorsinstalled.





7.3.1 MUXBUSSENSORSETTINGSANDINSTALLATION
At the “Menu Settings”screen use the navigation keys or thespinner dial place the highlight
bar on  item 1 “MuxBus Sensor Setup”. Select this item by pressing the spinner dial or the
“Enter”key.

1.Newsysteminstallation:Placethehighlightbaron“AutoDetect”.Press“Install”.
