Owner's manual

SEEDHAWK®AIRCARTOPERATOR’SMANUAL23
4.3.1 POSITIONINGTHECONVEYOR

NOTE:Ensurethatthearea in the vicinity of conveyor operation is freeof obstructions and
thatallbystanders,especiallychildren,arekeptatasafedistancebeforepositioning
oroperatingtheconveyor.

1. Ensure your tractor circuit is engaged in
the correct direction prior to engaging the
conveyordivertervalve.Ifcircuitisalready
engaged,directthefandivertervalvetothe
conveyorposition fromthefansetting.Use
theremoteprovid ed tomove theconveyor
in and out of transport.  NOTE: If remote
does not operate properly use manual
leversprovidedasbackupcontrol.

2. Remove pin from outer arm locking
mechanismandunlatch,Figure14.

3. Remove pin from rear locking arm, swing
out handle, and release conveyor, Figure
15.

4. Maneuver conveyor, using tilt  cylinder first
to lift conveyor out of the front saddle,
Figure16.

5. Movetheouterarmandthentheinnerarm
to position conveyor where filling or
emptying the aircart is optimal.Unlatch
andunfoldtheconveyorhopper.

6. Hydraulic cylinderswill holdthepositionso
conveyor will not move even if placed on
uneventerrain.
Figure14 
Figure15 
Figure16 