Owner's manual

SEEDHAWK®AIRCARTOPERATOR’SMANUAL21
4.2.4 AUGERTRANSPORTPOSITON

NOTE:Fillauger shouldalways besecured for
transport, no matter how short the distance.
Cleanoutaugerpriortotransportorstorage.

1. Positiontheaugersothatthetubeisresting
onthelockingmechanismatthebackofthe
aircart. In TBH configurations only, the
hopper can be rotated down for transport,
Figure10.






2. The locking mechanism must be used to secure
auger when transporting at all times, Figure 11.







3. Be sure  to secure locking mechanism by replacing
pin,Figure12.





4. Lift and swing handle in towards the aircart,
then pull down to secure it. Push the auger
divertervalvebacktothefanposition.


Figure10 
Figure11 
Figure12 