Owner's manual

SEEDHAWK®AIRCARTOPERATOR’SMANUAL19
Figure5 
4.2.1 POSITIONINGTHEAUGER

NOTE:Ensurethattheareainthevicinityofaugeroperationisfreeofobstructionsandthat
all bystanders,especially children,are keptat asafedistancebeforepositioning or
operatingtheauger.

1. Ensure your tractor circuit is engaged in
the correct direction prior to engaging the
auger diverter valve. If circuit is already
engageddirectthefandivertervalvetothe
fill auger position  from
the fan location,
Figure5.Usetheremoteprovidedtomove
theaugerinandoutoftransport.NOTE:If
remote does not operate properly use
manualleversprovidedasbackupcontrol.

2. Remove locking pin, lift the locking handle,
and swing out to usable position. Unlock
lever by pushing it down to take the auger
outoftransport,Figure6.

3. Move the outer arm first when positioning
auger,Figure7.

4. Unfoldaugerandpositionitwherefillingor
emptyingtheaircartisoptimal.

5. Allowhoppertocome intocontactwiththe
groundbeforefinalpositioning.

6. Hydraulic cylinder will hold the auger’s
positionsoitwillnotmoveifpositioned on
levelground.


Figure7 
Figure6 