User guide

SEEDHAWK®30SERIESOPERATOR’SMANUAL78
4.24.8 TRAMLINEOPERATION
The tramline function operation is controlled by the Drive Engage “ACK” key.This allows a
predeterminedpatternto be repeatedacross afieldwith rows left unseededtofacilitate the
operation of sprayers.When active during a tramline seedin g pass the control system will
leave 2 furrow openers up out of the ground when the rest drop and seed flow to those
openerswill beblocked.Duringother passesnot requiringthetramlinerows all the openers
will drop and seed flow will go to all the openers.There are no extra operator operational
functionsneededoncethetramlinefunctionisenabledandthetramlinepatternisestablished.

During an active tramline pass, an icon will display in  the
top display area ofthe monitor screen.Also, the monitor
candisplaywhichseedingpassinthepatternisinuse.The
last passin the patternwill always bethe onethat will be
thetramlinepass.







The monitor will display the tramline status on the run
screen.Toaddthistothedisplaypressanyofthesoftkeys
to bring up the soft key menu, then press “Item”. A
highlight box will appear over the upper LH window.
Navigatethehighlightboxtothedisplaywindowyouwant
to place the marker information and press “Enter”.A
menuwillappearwithalistofalltheitemsyoucandisplay
inthewindow.Navigateto“FieldSeedingPass”andpress
“Enter”.


NOTE: The window item selection is
 time limited. If no action is taken after selecting “Item”
from the soft key menu the monitor will cancel the function.When displayed the “Field
SeedingPass”displaywillshow1withthefirstseedingpassandincrementto2withthenext
passandthen3,etc.,returningto1whenthepatternrepeats.
FIGURE4.98
FIGURE4.97