User guide

SEEDHAWK®30SERIESOPERATOR’SMANUAL76
4.24.6 MARKERARMOPERATION
Themarkeroperationiscontrolledbythedriveengagebutton“ACK”.
1.Atthebeginningofaseedingpasspressthe“ACK”buttontoengagethedriveandlowerthe
furrowopeners.

2.Thenpressthe“Down”keytoextendthemarker.Travlingacrossthefieldthemarkercan
beraisedandloweredasn ecessarytoaccommodateobstacles.Attheendoftheseedingpass
themarkercanberetractedbypressingthe“Upkeyoritwillautomaticallyretractwhenthe
“ACK” button is pressed to disengage the drive and raise the openers.Pressing the “ACK”
button also increments the marker sequence so the alternate marker will extend with the
beginningofthenextseedingpass.
NOTE:Themonitorwill displaythemarkerstatusontherunscreen,toaddthistothedisplay
pressanyofthesoftkeystobringupthesoftkeymenu.

1.Press“Item”.AhighlightboxwillappearovertheupperLHwindow.Navigatethehighlight
box to the display window were the user wants to place the marker information and press
“Enter”.
2.Amenu
will appearwith a list of allthe itemsthe user
candisplayinthewindow.NavigatetoSelectiveMarker”
and press “Enter”.When displayed the Selective marker
display will show NONE when no markers are extended,
RIGHT or LEFT when one marker is extended and BOTH
whenbothmarkersareextended.
NOTE:The window itemselection is time limited.If no action istaken afterselecting“Item”
fromthesoftkeymenuthemonitorwillcancelthefunction.
FIGURE4.92
FIGURE4.93