User guide

SEEDHAWK®30SERIESOPERATOR’SMANUAL71
4.24 NORMALOPERATION
ToPowerupturnthemonitor,pressthepowerkey.Themonitorwillgothroughashortstart
up procedure and will display a list of all  the sen sors that it recognizes from the installed
system. If a sensor that should be present on the system is not found a warning screen will
display asking the user what to do. If multiple sensors are not found there will be multiple
warningscreens displayedwith thefirst expectedsensor not foundshowing thefirst warning
screen.Thiswill followthe orderofthe sensorinstallationscreen.Seetroubleshooting guide
forpossiblereasonsthatasensororsensorsarenotfoundatstartup.

If all the installed sensors are found, the monitor will display a list of found sensors and the
user will need to press the soft key labeled “OK”. This will bring up the normal run screen.
Items displayed on the run screen can be user selected and the layout of the run screen can
alsobeuserselected,SEE“4.17.4ITEMMENU”ONPAGE52.

Atthispointthesystemisreadyforoperation.
FIGURE4.80 
FIGURE4.81